Braxton Manufacturing Co., Inc.
Precision Eyelets from Braxton
The Deep Draw Process
Precision Deep-Drawn Components
Sample Deep-Drawn Parts
The Deep Draw Process
Manufacturing Capabilities
Request a Free Sample Kit
Request for Quote
About Braxton Manufacturing Co.
Quality Control
News About Braxton
Contact Braxton
Return to Braxton's Home Page
Deep-Drawn Eyelet demo
Deep-drawn eyelet animated demo
Deep-Drawn Parts
View Braxton's Deep-Draw video demo
Get the free Flash Player plug-in from Adobe

Starting with Flat Stock...
Braxton Provides the Deep-Drawn Advantage
from subminiature to complex parts

Compared to screw machines, plastic extrusions, tubing and stampings, Braxton’s deep-drawing techniques offer many benefits:

  • Starting with flat stock and ending with a tubular part, this process minimizes material waste.

  • Superior part-to-part and batch-to-batch repeatability are assured.

  • Slitting, flaring and hole punching, normally considered secondary operations, can be performed on the drawing machine.

  • Intricate designs not previously possible can be produced.

  • Raw material is work hardened during the drawing process, therefore eliminating the need for secondary heat treating on most finished parts.

  • Starting stock can be clad or pre-plated with gold prior to the deep-draw process, guaranteeing even coverage of gold on both the OD & ID of microminiature tubes with or without a closed end as small as 0.005" (0.13mm) ID. This process also eliminates the threat of residual acid trapped in the parts, a type of contamination that is commonly found in the barrel plating process.

  • Braxton's proprietary drawing machines are built in-house. Coupled with our advanced in-house carbide die making facilities, our drawing machines enable us to produce parts in more sizes, and with significantly superior tolerances and finishes, in comparison to competing processes.

Deep-Draw Demos: Animation | Video
Related Pages: Capabilities | Sample Parts | Deep Drawing Machines

Deep-draw tooling and dies

Sample Parts | The Deep Draw Process | Capabilities | Samples | RFQ | About | QC | News | Contact
Braxton Manufacturing Co., Inc.
858 Echo Lake Road, P.O. Box 429, Watertown, CT 06795 | Tel: 860-274-6781 | Fax: 860-274-9195
Braxton Manufacturing Co. of California, Inc.
2641 Walnut Ave., P.O. Box 425, Tustin, CA 92780 | Tel: 714-508-3570 | Fax: 714-508-3571